Bell - Vador SA2015 Helmet - White/XL

  • Bell - Vador SA2015 Helmet - White/XL - A1025WX-YZP
  • Bell - Vador SA2015 Helmet - White/XL - A1025WX-YZP
  • Bell - Vador SA2015 Helmet - White/XL - A1025WX-YZP
  • Bell - Vador SA2015 Helmet - White/XL - A1025WX-YZP
  • Bell - Vador SA2015 Helmet - White/XL - A1025WX-YZP
  • Bell - Vador SA2015 Helmet - White/XL - A1025WX-YZP
  • Bell - Vador SA2015 Helmet - White/XL - A1025WX-YZP
  • White


Extra Shield:

Helmet Bag:

Retail: $499.95
Price: $399.95
    Discontinued item with limited sizes remaining. Please check options above for current availability.

    The Vador is a complete design departure for Bell, incorporating an aggressive blunt nose design and pilot style shield. Designed primarily for use in drag racing, karting and dirt track racers, the Vador is certified to the Snell SA2015 standard and available in white or rubberized matte black in sizes Small to XL.

    The Vador features a lightweight composite shell, comfortable interior fit and rear facing vents to prevent dust and dirt from entering the helmet. The Vador takes a 289 SRV (3MM) shield with thumb tab on the drivers left side to allow for easy shield operation, SRV-1 visor system and new rubber eyeport gasket for improved visor seal. Each helmet comes with a clear shield and Bell visor strip as standard equipment.

    The Vador also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the Vador by using Bell's Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. The helmet is available in White and Rubberized Matte Black finish - the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes.

    The Vador is set up for use with Head and Neck Restraint devices and features Bell's M6 terminal hardware that is incorporated into the helmet and accepts Head and Neck Restraint anchor system hardware.

    Detailed Specs:
    • Multi-use Helmet with Aggressive Styling
    • Pilot Style Shield
    • Lightweight Composite Shell Technology
    • Rear Facing Chin Bar Vents
    • Recessed Face Piece for Seamless Radio Integration
    • New Rubber Visor Eyeport Seal
    • E-Max Multi-density Liner
    • 289/3MM SRV Shield (SRV-1 Pivot System)
    • Comfortable Standard Interior
    • M6 Terminal Hardware for Head & Neck Restraint Devices
    • Snell SA2015 Certification
    Take several measurements. The largest measurement is the one you want to use.

    Proper helmet fit is vital to the performance of a helmet. For the helmet to perform properly during an impact, it must stay securely on the head. Due to varying shapes, heads that are apparently the same size when measured may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a tape measure.

    Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement.

    Sizing Notes: Sizing varies between brands. Please check the sizing chart for *each* item.

    Notes A: Snell SA2015 Rated Helmet
    Notes B: Full-Face SA2015 Auto Racing Helmet
    Snell Rating: The Snell SA2015 standard certifies a helmet for auto racing use until the year 2025. It is also accepted by most karting organizations.
    Eyeport Size: Limited / Pilot
    Shield Type: 289/3MM SRV-1
    Options: 2029221 - HANS POST ANCHOR PRO BK KIT (AK1131.12) BLACK M6

    Karting Helmets Only, Full Face, Auto Racing, Dirt Track, HANS-Ready, All Snell Helmets, Snell SA2015, Closeouts
    Part Number #: 142201#