X

ZAMP - RZ-60 Snell SA2020 Racing Helmet

  • ZAMP - RZ-60 Snell SA2020 Racing Helmet - A0245
  • ZAMP - RZ-60 Snell SA2020 Racing Helmet - A0245
  • ZAMP - RZ-60 Snell SA2020 Racing Helmet - A0245
  • ZAMP - RZ-60 Snell SA2020 Racing Helmet - A0245
  • ZAMP - RZ-60 Snell SA2020 Racing Helmet - A0245
  • ZAMP - RZ-60 Snell SA2020 Racing Helmet - A0245
  • ZAMP - RZ-60 Snell SA2020 Racing Helmet - A0245
  • ZAMP - RZ-60 Snell SA2020 Racing Helmet - A0245
Color:
  • Gloss Black
  • Gloss White

Size:

Aero Options:

Extra Shield:

Helmet Bag:


Retail: $299.95
Price: $269.95
    Quantity:
    The RZ-60 Auto Racing Helmet uses a lightweight aramid mix shell and is designed to meet the Snell SA2020 standard.

    The aggressive shell design provides protection with a small lower chin bar as well as enhanced aero properties while the interior uses plush removable padding with included ear cups and ear pads. The RZ-60 Helmet includes M6 Terminals for easy use with HANS Devices.

    Features:
    • Lightweight Aramid Mix Shell
    • Small Lower Aero Chin Bar for less buffeting at speed
    • Chin bar and a top air ventilation for better air flow
    • Plush Fire Retardant Interior
    • Removable/Washable Comfort Liner
    • Z-20 Series 3mm Shield with Tear Off Posts
    • Available in Gloss White or Gloss Black styles
    • Includes soft-touch drawstring Helmet Bag
    • Hydration Hole with Plug for easy drink set up
    • Ear Cups & Ear Pads to give driver quieter environment
    • M6 Terminal Hardware for easy use with HANS Devices
    • Snell SA2020 Rated


    Aero Options:
    • Top Air Vent Scoop: Use for open cockpit racing to allow more air into the helmet at speed.
    • Rear Spoiler Clear: Use for open cockpit racing to increase helmet stability at speed.
    • Forced Air Intake - Regular: Use to attach a forced air / fresh air pump to helmet. The 'regular' style uses a standard 1.5" nozzle for compatibility with most forced air system hoses.
    • Forced Air Intake - Low Profile: Use to attach a forced air / fresh air pump to helmet. The 'low profile' style uses a lower & wider nozzle for cockpits where clearance is an issue. This may require an adapter to connect to a standard forced air system. The adapter is available to purchase here.

    Fly Racing - Pro Helmet Garage Bag (Optional)
    • Oversized helmet bag fits all helmet brands
    • Full fleece interior provides the ultimate in protection
    • Upper Mesh Venting allows helmet to dry quickly
    • Generous Side Pockets - Holds your balaclavas, gloves, and more!
    Take several measurements. The largest measurement is the one you want to use.



    Proper helmet fit is vital to the performance of a helmet. For the helmet to perform properly during an impact, it must stay securely on the head. Due to varying shapes, heads that are apparently the same size when measured may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a tape measure.

    Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement.

    Sizing Notes: Sizing varies between brands. Please check the sizing chart for *each* item.

    Notes A: Snell SA2020 Rated Helmet
    Notes B: Full Face Snell Rated Race Helmet
    Notes C: HANS-Ready Racing Helmet
    Notes D: Tearoffs for this helmet are available here: ZAMP - Tearoffs - 2 Mil - Box of 200.
    Snell Rating: The Snell SA2020 standard certifies a helmet for use in competitive auto racing. It is also accepted by most karting organizations.
    Optional Helmet Bag: Fly Racing - Pro Helmet Bag
    Karting Helmets Only, 2XL+ Sizes, Full Face, Auto Racing, Dirt Track, Forced Air, HANS-Ready, All Snell Helmets, Snell SA2020, Closeouts
    Part Number #: H766001