X

ZAMP - RZ-62 Aero SA2020 Race Helmet

  • ZAMP - RZ-62 Aero SA2020 Race Helmet - A3550
  • ZAMP - RZ-62 Aero SA2020 Race Helmet - A3550
  • ZAMP - RZ-62 Aero SA2020 Race Helmet - A3550
  • ZAMP - RZ-62 Aero SA2020 Race Helmet - A3550
  • ZAMP - RZ-62 Aero SA2020 Race Helmet - A3550
  • ZAMP - RZ-62 Aero SA2020 Race Helmet - A3550
  • ZAMP - RZ-62 Aero SA2020 Race Helmet - A3550
  • ZAMP - RZ-62 Aero SA2020 Race Helmet - A3550
SA2020
Color:
  • White
  • Matte Black
  • Flo Orange
  • Pink/Purple Graphic
  • Blue/Neon Graphic
  • Red/Orange Graphic

Size:

Aero Options:

Extra Shield:

Helmet Bag:


Retail: $359.95
Price: $324.95
    Quantity:
    The RZ-62 Pro Aero Racing Helmet uses a lightweight aramid mix shell and is rated to the Snell SA2020 standard. The aggressive shell design provides additional protection with a large lower chin bar as well as enhanced aero properties while the interior uses plush removable padding with included ear cups and ear pads.

    The RZ-62 Helmet offers more unique race set ups than any other helmet in same price range. Customize your Helmet for all types of racing including Open Wheel, Closed Cockpit, Dirt Track, Karting, Boat, Rally and more with unique aero and air intake options.

    Features:
    • Lightweight Aramid Mix Shell
    • Large Lower Aero Chin Bar to reduce buffeting
    • TRI-Tech Air System allows you to run Natural Air, Forced Air, or Plugs
    • Plush Fire Retardant Interior
    • Removable/Washable Comfort Liner
    • Z-20 Series 3mm Shield with Tear Off Posts
    • Includes soft-touch drawstring Helmet Bag
    • Hydration Hole with Plug for easy drink set up
    • Ear Cups & Ear Pads to give driver quieter environment
    • M6 Terminal Hardware for easy use with HANS Devices
    • Snell SA2020 Rated



    Aero Options:
    • Rear Spoiler & Chin Spoiler (Clear): Use for open cockpit or kart racing to increase helmet stability at speed.
    • 3 x Vent Scoops w/ Plugs: Use for dirt track or boat racing to prevent dirt and water intrusion.
    • Forced Air Intake - Regular: Use to attach a forced air / fresh air pump to helmet. The 'regular' style uses a standard 1.5" nozzle for compatibility with most forced air system hoses.
    • Forced Air Intake - Low Profile: Use to attach a forced air / fresh air pump to helmet. The 'low profile' style uses a lower & wider nozzle for cockpits where clearance is an issue. This may require an adapter to connect to a standard forced air system. The adapter is available to purchase here.

    Fly Racing - Pro Helmet Garage Bag (Optional)
    • Oversized helmet bag fits all helmet brands
    • Full fleece interior provides the ultimate in protection
    • Upper Mesh Venting allows helmet to dry quickly
    • Generous Side Pockets - Holds your balaclavas, gloves, and more!
    Take several measurements. The largest measurement is the one you want to use.



    Proper helmet fit is vital to the performance of a helmet. For the helmet to perform properly during an impact, it must stay securely on the head. Due to varying shapes, heads that are apparently the same size when measured may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a tape measure.

    Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement.


    Sizing Notes: Sizing varies between brands. Please check the sizing chart for *each* item.

    Notes A: Snell SA2020 Rated Helmet
    Notes B: Lightweight Aramid Mix Race Helmet
    Notes C: HANS-Ready Racing Helmet
    Notes D: Tearoffs for this helmet are available here: ZAMP - Tearoffs - 2 Mil - Box of 200.
    Snell Rating: The Snell SA2020 standard certifies a helmet for auto racing use until the year 2030. It is also accepted by most karting organizations.
    Optional Helmet Bag: Fly Racing - Pro Helmet Bag

    Karting Helmets Only, 2XL+ Sizes, Full Face, Auto Racing, Dirt Track, Forced Air, HANS-Ready, All Snell Helmets, Snell SA2020, Closeouts
    Part Number #: H764001