X

ZAMP - Z20 Helmet Shields - Fits All RZ Models

Shield:


Price: $34.95
    In Stock In Stock | Ships Free
    Quantity:

    Need to replace a damaged shield or just wanting to give your helmet a cool new look?

    These ZAMP Z20 shields fit all ZAMP RZ helmet models. (Full compatibility list below)

    All ZAMP Z-20 Series Helmet Shields include Tear Off Posts and a removable Sun-Strip at top of shield to reduce glare.


    Styles Available:

    - Dark Smoke Shield has a Dark Tinted Finish;
    - View from inside of helmet is equivalent to moderate tinted sunglasses

    - Amber Shield has a Light Tint Finish;
    - Great for evening/night racing!

    - Iridium Chrome has a Chrome/Mirror Finish;
    - Pearlescent coating changes colors between blue, green, and purple
    - View from inside of helmet is equivalent to moderate tinted sunglasses

    - Silver Chrome Shield has a Chrome/Mirror Finish;
    - View from inside of helmet is equivalent to moderate tinted sunglasses

    - Blue Prizm Shield has a Chrome/Mirror Finish;
    - Pearlescent coating has blue base with shades of purple
    - View from inside of helmet is equivalent to dark tinted sunglasses

    - Red Prizm Shield has a Chrome/Mirror Finish;
    - Pearlescent coating has red base with shades of gold, blue, and green
    - View from inside of helmet is equivalent to dark tinted sunglasses

    - Gold Prizm Shield has a Chrome/Mirror Finish;
    - Pearlescent coating has gold base with shades of red, blue, and green
    - View from inside of helmet is equivalent to dark tinted sunglasses

    - AntiFog Clear and AntiFog Dark Smoke Shields feature AntiFog for minimal moisture build up for the best clarity.


    These shields fit all of the following helmets:

    • ZAMP RZ-36
    • ZAMP RZ-36 Dirt
    • ZAMP RZ-37Y
    • ZAMP RZ-42Y
    • ZAMP RZ-56
    • ZAMP RZ-59
    • ZAMP RZ-60
    • ZAMP RZ-62
    • ZAMP RZ-64C
    • ZAMP RZ-65D
    • ZAMP RZ-70E
    • -------------
    • ZAMP RZ-35
    • ZAMP RZ-58
    • ZAMP RZ-40
    • ZAMP RZ-42
    • ZAMP RZ-44C
    • ZAMP RZ-44CE
    • ZAMP RZ-45D
    • -------------
    • ZAMP RZ-34
    • ZAMP RZ-34Y
    • ZAMP RZ-55

    NOTE: DO NOT USE power tools or overtighten screws when changing shields.

    Step 1:
    Lay a towel on a flat surface and set the helmet on it.

    Step 2:
    Remove the shield pivot tensioners on each side. (This is the smaller screw on the sides of the shield.)

    Step 3:
    Remove the shield pivot screws on each side. (This is the larger screw on the sides of the shield. For best results, we suggest using a quarter to loosen/tighten these screws.)

    Step 4:
    Remove the shield. We suggest using a soft cloth towel to wipe down the rubber seal as well as where the shield mounts to the helmet for best results.

    Step 5:
    Place the new shield on the helmet. There are two white washers that go between the shield and helmet, make sure these are in place before re-installing the shield pivot screws.

    Step 6:
    Hand thread the shield pivot screws to hold the shield in place. Once hand threaded, use a quarter to tighten until snug with the helmet shell. Do not overtighten.

    Step 7:
    Hand thread the shield pivot tensioners, then tighten to desired tension for shield movement.



    Notes A: Replacement Shields & Visors
    Notes B: ZAMP Replacement Helmet Shields

    Shields / Visors
    Part Number #: HASZ20