X

ZAMP - Z24 Helmet Shields - Fits ZR-72 Helmet

(Clear & PhotoC Only)


Price: $54.95
    In Stock In stock
    In Stock Ships Free

    Need to replace a damaged shield or just wanting to give your helmet a cool new look?

    These ZAMP Z24 shields fit the ZAMP ZR-72 Helmet Only.

    Z-24 Shield Features:
    • FIA-Rated
    • Anti-Fog Coating
    • include Tear Off Posts
    • Removable Sun-Strip at top of shield

    Styles Available:

    - Dark Smoke Shield has a Dark Tinted Finish;
    - View from inside of helmet is equivalent to moderate tinted sunglasses

    - Amber Shield has a Light Tint Finish;
    - Great for evening/night racing!

    - Iridium Chrome has a Chrome/Mirror Finish;
    - Pearlescent coating changes colors between blue, green, and purple
    - View from inside of helmet is equivalent to moderate tinted sunglasses

    - Silver Chrome Shield has a Chrome/Mirror Finish;
    - View from inside of helmet is equivalent to moderate tinted sunglasses

    - Blue Prizm Shield has a Chrome/Mirror Finish;
    - Pearlescent coating has blue base with shades of purple
    - View from inside of helmet is equivalent to dark tinted sunglasses

    - Red Prizm Shield has a Chrome/Mirror Finish;
    - Pearlescent coating has red base with shades of gold, blue, and green
    - View from inside of helmet is equivalent to dark tinted sunglasses

    - Gold Prizm Shield has a Chrome/Mirror Finish;
    - Pearlescent coating has gold base with shades of red, blue, and green
    - View from inside of helmet is equivalent to dark tinted sunglasses

    - Photochromatic Shields change from clear to a dark tint when exposed to bright light similar to a Transitions lens.
    - Prizm versions also feature a colored reflective external coating.

    - Polarized Shields are light smoke tinted and made of a polarized material to reduce glare and eye-strain.
    NOTE: DO NOT USE power tools or overtighten screws when changing shields.

    • Step 1: Lay a towel on a flat surface and set the helmet on it.

    • Step 2: Remove the shield pivot tensioners on each side. (This is the smaller screw on the sides of the shield.)

    • Step 3: Remove the shield pivot screws on each side. (This is the larger screw on the sides of the shield. For best results, we suggest using a quarter to loosen/tighten these screws.)

    • Step 4: Remove the shield. We suggest using a soft cloth towel to wipe down the rubber seal as well as where the shield mounts to the helmet for best results.

    • Step 5: Place the new shield on the helmet. There are two white washers that go between the shield and helmet, make sure these are in place before re-installing the shield pivot screws.

    • Step 6: Hand thread the shield pivot screws to hold the shield in place. Once hand threaded, use a quarter to tighten until snug with the helmet shell. Do not overtighten.

    • Step 7: Hand thread the shield pivot tensioners, then tighten to desired tension for shield movement.


    Notes A: Replacement Shields & Visors
    Notes B: ZAMP Replacement Helmet Shields
    Part Number #: HASZ24
    Type of Product:
    Shields & Visors



    Our KartingFeed- the hottest new karting gear: